Three clear PET jars with gold, green and orange lids holding mixed nuts, beans and dried cranberries, grains scattered on the table

Home / News

Notes from the floor

Practical writing on sealing, material choice, tolerances and the small details that decide whether a container arrives intact.

2026-10-21Technical

Why airtight jars leak: four causes a seal test will find

Gasket compression, lid ovality, gate blush and packing pressure. Most leaks are decided in the tool, not in the filling line — here is how to tell which one you have.

Read article

2026-10-21Materials

PP or PET: choosing the right jar for what goes inside

Clarity, heat resistance, oxygen barrier and cost per thousand rarely point the same way. A short guide for dry food, spices, coffee and hardware.

Read article

2026-10-21Logistics

Shipping empty jars: nesting ratio and the carton math

How much air you pay for in a 40-foot container, and the three packing changes that cut freight per piece by 12%.

Read article

2026-09-18Design

Spice jar lids: shaker, flip or grinder?

The closure decides the filling line, the shelf position and the reorder rate. What we see working in retail sets across different markets.

Read article

2026-09-02Production

Thin-wall vs thick-wall: what changes when you cut 0.3 mm

Cycle time, stiffness, stacking load and the risk of sink marks. Where the saving is real and where it costs you a container.

Read article

2026-08-14Export

Private label for jars: artwork, colors and the MOQ trap

In-mold labeling looks cheap per piece until you print the minimum run. How to plan a first private-label order without leftover stock.

Read article

1 2 →